FLED Lights
Details
- Product Type Products
- Regions Auckland, Australian Capital Territory, Christchurch, Dunedin, Hamilton, Lower Hutt, Napier & Hastings, Nelson, New Plymouth, New South Wales, Northern Territory, Palmerston North, Queensland, Queenstown, Rotorua, South Australia, Tasmania, Tauranga, Victoria, Wellington, Western Australia
Contact
- Yuchen Xu 0401925127
- Website Visit
- Email chen@zigerenergy.com
ISupplier
- Company Name ZIGER ENERGY
- ISupplier Profile Visit
About
FLED is a revolution of point light source to the flat light source. Based on the remote phosphor technology plus a variety of Nano materials and rare earth materials form the unique formula of the luminous film, and make the film through the independently developed equipment and complex technology. The thickness reach to 0.1mm, more than one hundred kinds of materials are evenly distributed on such thin film, showing the progressiveness and non-duplication of the FLED technology. It can be used for many places including tunnel, airport, park, mining and factory.
Sustainability Outcomes
Compared to commonly-used LED, FLED has the following advantages :
1) higher light efficiency thus help to save energy;
2) reduce temperature, light decay and thus prolong the life (The service life of the light source can reach 10 years);
3) reduce glare thus help reduce traffic accidents;
4) water-proof available;
5) anti-falling and compression resistance;
6) ultra light, ultra thin and flexible.
Applicable Credits
| IS v1.2 | Dis-5 , Ene-1 , Inn-1 |
| IS v2.1 | Ene-1 , Env-5 , Inn-1 |
| Ene-1 (ISv2.1) | Energy Efficiency and Carbon Reductions | Compared with the point luminescence of LED, FLED is surface luminescence, and the luminous efficiency increases naturally with the increase of luminous area; At the same time, the unique formula of luminescent film makes the light efficiency higher; With the increase of light efficiency, the energy-saving effect is much better. The light attenuation of LED is at least 3% per year, which is higher when the heat dissipation is not good, while the light attenuation of FLED is only 0.3% per year, which can be ignored. |
| Env-5 (ISv2.1) | Light Pollution | The glare index of FLED light source is very small. When people look directly at the light source with naked eyes, the FLED light source returns to normal in 1 second, while the traditional light source takes about 60 seconds to be normal. Therefore, traffic accidents can be reduced where FLED street lamps are installed. |
| Inn-1 (ISv2.1) | Innovation | Contributes to Innovation Challenge-4: Sustainable Supplier and iSupply |
| Ene-1 (ISv1.2) | Energy and carbon monitoring and reduction | Compared with the point luminescence of LED, FLED is surface luminescence, and the luminous efficiency increases naturally with the increase of luminous area; At the same time, the unique formula of luminescent film makes the light efficiency higher; With the increase of light efficiency, the energy-saving effect is much better.. The service life of the light source can reach ten years. The light attenuation of LED is at least 3% per year, which is higher when the heat dissipation is not good, while the light attenuation of FLED is only 0.3% per year, which can be ignored. |
| Dis-5 (ISv1.2) | Light pollution | The glare index of FLED light source is very small. When people look directly at the light source with naked eyes, the FLED light source returns to normal in 1 second, while the traditional light source takes about 60 seconds to be normal. Therefore, traffic accidents can be reduced where FLED street lamps are installed. |
| Inn-1 (ISv1.2) | Innovation | Contributes to Innovation Challenge-8: Sustainable Supplier and iSupply |
More from ZIGER ENERGY
