Megaflo® Green
Details
- Product Type Construction Services, Piping, Plastic Products
Contact
- Rajesh Bhavsar 0437 983 775
- Website Visit
- Email r.bhavsar@geofabrics.com.au
ISupplier
- Company Name Geofabrics Australasia
- ISupplier Profile Visit
About
Megaflo® Green is 100% Australian made with locally sourced recycled polymer. Megaflo® Green panel drain provides the dimensional stability and field-proven structural strength for quick, effective subsurface drainage. Megaflo® Green consists of a perforated HDPE core wrapped with bidim® Green nonwoven geotextile to prevent soil ingress into the drainage system.
Performance is the distinguishing feature of the panel drain due to its ability to collect and remove water rapidly. Compared to 100mm diameter round pipe, Megaflo® Green has twice the inflow capacity for an equivalent length and will drain water in less than 60% of the response time. Its slim 40mm wide profile permits faster and more cost-effective installation in a narrower trench. The design of the Megaflo® Green panel drain permits significantly higher flow velocity at the lower head.
Sustainability Outcomes
Geofabrics is making a positive environmental impact by manufacturing and supplying products, such as Megaflo® Green that reduce reliance on non-renewable resources and reduce waste to landfill. Megaflo® Green is a product manufactured from 100% Australian sourced recycled plastics.
Megaflo® Green is 100% Australian made, from recycled polymer content – sourced locally. Increasingly, we are seeing Australian road, rail and infrastructure authorities providing instruction to maximize the level of recycled content used in projects; Megaflo® Green makes this aspiration a reality.
In addition, Megaflo® Green can assist and contribute to your project in achieving the requirements for the following credits:
Version 1.2
Pro-2 (Identification of Suppliers), Pro-3 Supplier Evaluation and Contract Award
Inn-1 Innovation
Ene-1 (Energy Efficiency)
Cli-1 (Climate Change Risk Assessment)
Lan-3 (Contamination and Remediation)
Was-3 (Deconstruction/Disassembly/Adaptability)
Mat-1 (Material Life Cycle Impact Measurement and Reduction)
Version 2.0
Spr-2 (Supplier Assessment and Selection), Spr-3 (Contract and Supplier Management),
Inn-1 (Innovation),
Ene-1 (Energy Efficiency),
Ecn-4 (Economic and Financial Sustainability, e.g. opportunities for utility assets)
Res-2 (Climate and Natural Hazard Risks),
Rso-2 (Contamination Remediation Material), Rso-4 (Resource Recovery), Rso-5 (Adaptability), Rso-6 (Material Life Cycle Impact Measurement and Reduction)
Applicable Credits
| IS v1.2 | Cli-1 , Ene-1 , Inn-1 , Lan-3 , Mat-1 , Pro-2 , Pro-3 , Was-3 |
More from Geofabrics Australasia
