COLORBOND® Intramax® steel
Details
- Product Type Life Cycle Assessment & EPD Development, Products
- Regions Australian Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, Western Australia
Contact
ISupplier
- Company Name BlueScope
- ISupplier Profile Visit
About
COLORBOND® Intramax® steel (CRP) is a prepainted steel product specifically designed for the
manufacture of cool room panels for cold storage and other temperature-controlled environments.
COLORBOND® Intramax® steel consists of a steel substrate that is coated with a zinc (Z275) coating
to provide corrosion resistance and then further protected and enhanced with a specially developed
oven-baked paint system, with the backing coat designed to facilitate adhesion to foam cores, for
common foam core adhesives, when manufactured into a panel.
Manufactured by BlueScope, COLORBOND® Intramax® steel conforms to relevant Australian
Standards (AS 1397:2021 and AS/NZS 2728:2013).
Sustainability Outcomes
BlueScope embraces circular economy principles in product development, including designing
products for durability and resilience.
Steel is strong, durable, and versatile and its inherent properties allow it to be recycled without loss
of quality over and over again. In some cases, it can be reused without reprocessing, again saving on
energy and resource use.
The steel in COLORBOND® Intramax® steel is 100% recyclable and its magnetic properties mean that
it can be easily separated for recycling and is less likely to end up in landfill.
BlueScope’s Port Kembla Steelworks site, where the steel for COLORBOND® Intramax® steel is
manufactured, is certified to the ResponsibleSteel™ Standard v1.1.
The ResponsibleSteel™ certification can give organisations in the steel value chain confidence in the
environmental, social and governance performance of our steelmaking facilities, and may help them
to meet their climate objectives and manage supply chain risks.
Applicable Credits
| IS v1.2 | Inn-1 , Mat-1 , Mat-2 , Was-2 , Was-3 |
| IS v2.1 | Inn-1 , Rso-4 , Rso-5 , Rso-6 , Rso-7 |
| Mat-1 | Materials life cycle impact measurement and reduction | The use of BlueScope's steel products with Environmental Product Declarations (EPDs) can help to demonstrate the environmental impacts of the project vs a reference building or structure - the COLORBOND® Intramax® steel EPD can be used to represent the impact of the product in whole-of-building or structure Life Cycle Assessment (LCA) and in the IS Materials Calculator. |
| Mat-2 | Environmentally labelled products and supply chains | COLORBOND® Intramax® steel may meet environmental labelling requirements of the IS Rating through its GreenRate™ ‘Level A’ certification and product-specific EPD. |
| Was-2 | Diversion from landfill | The magnetic properties of steel mean that it can be easily separated for recycling and the inherent value of steel scrap results in a high recovery rate. In Australia, this is evidenced by a recycling rate for metals of 90% (National Waste Report, 2020). The steel in COLORBOND® Intramax® steel is 100% recyclable without loss of quality. In some cases, it can be reused without reprocessing, again saving on energy and resource use. |
| Was-3 | Deconstruction/Disassembly/Adaptability | Steel is a strong, durable, and versatile material. BlueScope's steel products lend themselves well to structures that are designed for long life, resilience, and flexibility to accommodate multiple future reuse options without reinvestment in structural alteration and refurbishment. Steel also supports designs where end of life considerations are key, e.g. designing for disassembly and reuse. |
| Inn-1 (ISv1.2) | Contributes to Innovation Challenge-8: Sustainable Supplier and iSupply | |
| Rso-4 | Resource Recovery and Management | The magnetic properties of steel mean that it can be easily separated for recycling and the inherent value of steel scrap results in a high recovery rate. In Australia, this is evidenced by a recycling rate for metals of 90% (National Waste Report, 2020). The steel in COLORBOND® Intramax® steel is 100% recyclable without loss of quality. In some cases, it can be reused without reprocessing, again saving on energy and resource use. |
| Rso-5 | Adaptability | Steel is a strong, durable and versatile material. BlueScope's steel products lend themselves well to structures designed for long life, resilience, and flexibility to accommodate multiple future reuse options without reinvestment in structural alteration and refurbishment. Steel also supports designs where end of life considerations are key, e.g. designing for disassembly and reuse. |
| Rso-6 | Materials life cycle impact measurement and reduction | The use of BlueScope's steel products with Environmental Product Declarations (EPDs) can help to demonstrate the environmental impacts of the project vs a reference building or structure - the COLORBOND® Intramax® steel EPD can be used to represent the impact of the product in whole-of-building or structure Life Cycle Assessment (LCA) and in the IS Materials Calculator. |
| Rso-7 | Sustainability labelled products and supply chains | COLORBOND® Intramax® steel may meet environmental labelling requirements of the IS Rating through its GreenRate™ ‘Level A’ certification and product-specific EPD. |
| Inn-1 (ISv2.1) | Contributes to Innovation Challenge-4: Sustainable Supplier and iSupply |
More from BlueScope
